Immediately when paraffin-based crude oils were introduced, accumulation of asphaltenes in the flow lines of a well has been the major inhibiting factor towards a smooth flow of the crude oil. Every year, there have been many wells that experience substantial production losses due to asphaltenes build up to an extent that some have been abandoned altogether. For this reason paraffin removal oil wells is very critical to the productivity of any well.
Oil producing countries have tried all they can to make sure a permanent solution has been found to eliminate the problem of asphalting accumulation along the transportation channels of the kerosene. They have invested billions of money to find a cure to this problem but nothing viable has been found yet. For this reason, this mechanism works nicely for removing this kerosene waxing on oils lines and storage tanks.
For us to ensure that there is no accumulation of asphaltenes, one can physically remove the buildup. In this approach, the one operating the plant will use available cutting equipment and flow line scrappers to remove unwanted components. The advantage of this method is that there will be no stoppage of the production process as the removal is being done. In this way production continues normally as well l as eliminating unwanted materials.
Thermal technique is yet another method that can be used to eradicate asphaltenes. As the name suggests, this technique involves melting of the impurity material so that it can be easily extracted from the well. Even though this method is very simple to use and relatively cheap, if the right temperature and requirements are not observed, the results may be displeasing to the operator of the well.
If the unwanted materials are obstructed and cannot be easily reached as would be the case in pipes. Mechanical and thermal technique cannot be used. In this case hot water or steam will be thrust at a high pressure carrying away the impurities
Another advantage of using water to clean or remove asphalts along crude oil transportation lines is that water is not risky to the health of human beings and also animals and also when being released to the water bodies it is easily treated unlike chemicals which may pose a great danger the operators of crude oil plants and also aquatics after being released from the pipes.
Another and most important technique is use thermal means to remove kerosene wax that has developed along the piping. This is where the pipes are subjected to great and higher degree temperatures that melt the wax inside the walls of the pipes. However this method is only usable to metallic pipes and which cannot be easily melted by fire and severe heating.
Clearly, as a well operator, you will be spoilt of choice when searching for a method to use in dealing with asphaltenes in your well. You should however weigh all the methods available and only choose the one that best addresses your situation. In so doing, you will be able to completely eliminate impurities in your well and thus making it operate at optimum levels.
Oil producing countries have tried all they can to make sure a permanent solution has been found to eliminate the problem of asphalting accumulation along the transportation channels of the kerosene. They have invested billions of money to find a cure to this problem but nothing viable has been found yet. For this reason, this mechanism works nicely for removing this kerosene waxing on oils lines and storage tanks.
For us to ensure that there is no accumulation of asphaltenes, one can physically remove the buildup. In this approach, the one operating the plant will use available cutting equipment and flow line scrappers to remove unwanted components. The advantage of this method is that there will be no stoppage of the production process as the removal is being done. In this way production continues normally as well l as eliminating unwanted materials.
Thermal technique is yet another method that can be used to eradicate asphaltenes. As the name suggests, this technique involves melting of the impurity material so that it can be easily extracted from the well. Even though this method is very simple to use and relatively cheap, if the right temperature and requirements are not observed, the results may be displeasing to the operator of the well.
If the unwanted materials are obstructed and cannot be easily reached as would be the case in pipes. Mechanical and thermal technique cannot be used. In this case hot water or steam will be thrust at a high pressure carrying away the impurities
Another advantage of using water to clean or remove asphalts along crude oil transportation lines is that water is not risky to the health of human beings and also animals and also when being released to the water bodies it is easily treated unlike chemicals which may pose a great danger the operators of crude oil plants and also aquatics after being released from the pipes.
Another and most important technique is use thermal means to remove kerosene wax that has developed along the piping. This is where the pipes are subjected to great and higher degree temperatures that melt the wax inside the walls of the pipes. However this method is only usable to metallic pipes and which cannot be easily melted by fire and severe heating.
Clearly, as a well operator, you will be spoilt of choice when searching for a method to use in dealing with asphaltenes in your well. You should however weigh all the methods available and only choose the one that best addresses your situation. In so doing, you will be able to completely eliminate impurities in your well and thus making it operate at optimum levels.
About the Author:
You can visit www.petro-genesis.com for more helpful information about Paraffin Removal Oil Wells And Their Importance.
No comments:
Post a Comment