Recycling all things old is the way to go. It's good for the environment, and it's often a great way to save money. For example, restoring old furnishings is a great way to decorate a home without spending a lot of money. There is no reason to send older pieces of furniture to the landfill when it can grace any home. However, it requires quality furniture stripping and refinishing to make this possible.
The key word is quality stripping. If it's not done right from the get go, there will only be problems in the refinishing stay each. Such problems would be obvious to the naked eye, making the piece look less than favorable. Therefore, it takes the steady hands and good skills, as well as top-of-the-line products that can actually bring such great results.
People like to tackle such projects themselves, especially of late, in this do-it-yourself world. Certainly, it's not a problem when it's just a matter of salvaging a common piece, but it is a problem if it's a valuable one. A valuable antique, for instance, should go directly to the professionals, and should not be refinished by any inexperienced individual.
Certainly, such skill and hard work doesn't come cheap. Professionals to charge quite a hefty sum, depending on the geographical location, and the skill level of the individual. On the other hand, an old piece of furniture could be given a whole new life when taking on this task oneself.
Going it alone can be fun, but people must understand that a lot of work is involved. It all begins with some investigation into the type of wood and the type of finish on the piece. Once this is this covered, one will know which steps follow. There are certain supplies or methods used on particular types of wood and types of finish.
For example, in some cases the finish can be removed with a heat gun. Others might require the use of a liquid application with a paintbrush, that's later scraped off, along with the finish. Next, it's necessary to sand the surfaces, even those bitty intricate details that are hard to reach.
After all the sanding is completed, then the surface is to be wiped clean with a tack cloth. This is meant to reduce any dust that could affect the end results. The next step involves painting were staining the piece. There are a few other steps involved, and this is just an introduction to demonstrate the amount of elbow grease required to successfully complete such a project.
One thing is for sure, and that's that of refinished piece of furniture can breathe new life into an entire home. Also, it can be a project that one can be proud of, either because the piece was salvaged, or because it was completed by the individual. One way or the other, this new item can look fabulous in any home.
The key word is quality stripping. If it's not done right from the get go, there will only be problems in the refinishing stay each. Such problems would be obvious to the naked eye, making the piece look less than favorable. Therefore, it takes the steady hands and good skills, as well as top-of-the-line products that can actually bring such great results.
People like to tackle such projects themselves, especially of late, in this do-it-yourself world. Certainly, it's not a problem when it's just a matter of salvaging a common piece, but it is a problem if it's a valuable one. A valuable antique, for instance, should go directly to the professionals, and should not be refinished by any inexperienced individual.
Certainly, such skill and hard work doesn't come cheap. Professionals to charge quite a hefty sum, depending on the geographical location, and the skill level of the individual. On the other hand, an old piece of furniture could be given a whole new life when taking on this task oneself.
Going it alone can be fun, but people must understand that a lot of work is involved. It all begins with some investigation into the type of wood and the type of finish on the piece. Once this is this covered, one will know which steps follow. There are certain supplies or methods used on particular types of wood and types of finish.
For example, in some cases the finish can be removed with a heat gun. Others might require the use of a liquid application with a paintbrush, that's later scraped off, along with the finish. Next, it's necessary to sand the surfaces, even those bitty intricate details that are hard to reach.
After all the sanding is completed, then the surface is to be wiped clean with a tack cloth. This is meant to reduce any dust that could affect the end results. The next step involves painting were staining the piece. There are a few other steps involved, and this is just an introduction to demonstrate the amount of elbow grease required to successfully complete such a project.
One thing is for sure, and that's that of refinished piece of furniture can breathe new life into an entire home. Also, it can be a project that one can be proud of, either because the piece was salvaged, or because it was completed by the individual. One way or the other, this new item can look fabulous in any home.
About the Author:
You can visit www.noopys.com for more helpful information about New Treasures Discovered From Quality Furniture Stripping And Refinishing.
No comments:
Post a Comment